North Cornwall · EX23
Coombe Valley extension — feasibility first, drawings second
Extensions are the bread and butter of Cornish homes — adding the kitchen-diner the original layout never had, the bedroom for a growing family, or the light and views the back of the house should always have had. Anchor any Coombe Valley extension in the local fabric and the rest follows — Coombe Valley is a small rural hamlet in the EX23 area, with scattered homes, lanes and a deliberately quiet settlement pattern, with a building stock that leans toward small infill homes and converted barns.
Coombe Valley sits in North Cornwall — covering EX23 from Bude, Stratton, Poughill outward.
- Rural / open-countryside policy area
- ✓ rural policy area experience built into the fee
- ✓ Cornwall Council regulars across every sub-area
- ✓ Free first site visit, no obligation
- ✓ Plain-English feasibility before any drawings
Who this is for
Coombe Valley runs the full mix — owner-occupier, holiday-let, commercial and the occasional smallholding — so we scope every extension enquiry from the use-class up.
Local watch-list
Local snags worth knowing before drawing a Coombe Valley extension.
Watch #1
Tighter Local Plan tests on isolated rural dwellings
Local proof — We typically have one or two extension jobs live in the EX23 area at any time, so the local planning officers know our drawings on sight.
Get a free feasibility viewFAQs
Coombe Valley Extensions — local questions answered.
- How long does the whole process take?
- Allow roughly three months for design and approvals, then twelve to twenty weeks on site for a typical single-storey extension. Wraparounds and two-storey add-ons take longer, mostly through approval and groundworks. In Coombe Valley specifically, we'd start by checking the latest parish-level planning history before committing to a direction.
- How much does an extension cost in Cornwall?
- Build costs in Cornwall typically run from around £2,200 to £3,200 per square metre for a good-quality single-storey extension, more for kitchen-grade fit-out or complex glazing. We give a realistic budget before drawings start, not after.
- Can you handle the build as well as the design?
- Yes — that's the whole point of the studio. One contract, one point of contact, no finger-pointing between architect and builder when something needs a decision on site.
- What about the Party Wall Act?
- If you share a wall with a neighbour or build close to a boundary, the Act applies. We flag it early, recommend a surveyor and keep the programme aligned with the notice period.
- Will my house be liveable during the build?
- For most rear and side extensions, yes — we sequence the works so the kitchen and one bathroom stay functional until the new build is watertight and connected.
Local context
Why Coombe Valley is its own job.
Locally, the main planning test is usually whether the proposal remains subordinate, locally detailed and acceptable on access, drainage and neighbour amenity. For extension specifically, Cornwall Council's Local Plan applies tighter tests to isolated rural dwellings here, so design rationale and policy fit need to be set out clearly from the outset. Which is why we scope Coombe Valley projects parish-up, not template-down — the EX23 context shapes the design from day one. Whether the project is on small infill homes in the centre or further out toward Bude, the extension response is locally tuned.
Planning note
Most extensions in Cornwall are either permitted development or a straightforward householder application — but Conservation Area and AONB sites need a more careful design conversation upfront.
What we focus on
Extensions considerations specific to Coombe Valley.
01
Permitted development for rear extensions runs to four metres on a detached house, three on a semi or terrace — but Article 4 areas remove this in some parishes.
02
Drainage on older Cornish properties is rarely on a clean modern map; CCTV survey before design is often money well spent.
03
Extensions over a certain proportion of the original house trigger full Part L upgrade obligations to the existing building — worth knowing before brief is set.
04
Cornish granite and slate-hung walls react differently to new openings than modern brickwork — lintel choice and structural sequencing matter.
Our process
How a Coombe Valley extension project runs.
Step 1
Brief
We meet on site, talk through how you live now and what's missing from the current layout.
Step 2
Design
Two or three sketch directions with rough budgets, then refinement of the chosen route.
Step 3
Approvals
Planning or Cert of Lawfulness, then a full building regs package.
Step 4
Build
Either through your own builder with our drawings, or as a full build by our team.
Step 5
Handover
Snag, certify, hand over the keys to your new space.
Typical single-storey rear extensions run twelve to twenty weeks on site; two-storey and wraparound projects sixteen to thirty weeks.
Local fabric
Why Coombe Valley homeowners pick a local studio for extension.
Building stock
Across Coombe Valley (EX23) we work on cottages, farmhouses, converted barns, bungalows, small infill homes. Each stock type drives a different extension response — small infill homes in particular needs careful detailing here.
Parish & policy
Coombe Valley sits in the parish of Coombe Valley, which matters for how parish-level consultation lands on a extension application.
Coverage
We cover EX23 from our studio, with regular extension jobs also running in Bude, Stratton, Poughill. Most Coombe Valley site visits get booked within the same week.
What does a first Coombe Valley consultation cost?
Nothing. We come to the property, walk the site, talk through what works on a EX23 plot and follow up with a written feasibility note inside a week — no obligation either way.
Request a free visitCoombe Valley is part of Bude
Coombe Valley sits inside the Bude catchment — we cover both as one extension territory.
See Extensions in Bude →Other services in Coombe Valley
Nearby places we cover
A extension in Coombe Valley stands or falls on how well it reads the street — we treat that as the design brief, not an afterthought.